0 Members and 8 Guests are viewing this topic.
First, I would like to thank you for such an inspiring and simple Mod. Personally, I have always loved the look and feel of a well and I am in need of an expert's opinion of how to rectify the problem.
I am not opposed to using a 3a switch, I would just prefer to use the tactile. That, and I hate to buy something and not use it (even if its only a couple of dollars)
I am not opposed to using a 3a switch, I would just prefer to use the tactile.
I have read posts on ECF and they say that the tactile switch is milliamp rated. Aren't you running like around 2 amps thru it? Wouldn't it burn out?I would listen to the Pro. Mr. Breaktru. He's seems to be knowledgeable about this.I may not have the post numbers, but I do a lot of forum stalking.
3/4" copper tubing 2ft, $11: http://goo.gl/D1ufq (can make several tubes w/ 2' of tubing)Caps x 2 = $2.28: http://goo.gl/bVn21Battery connector MV: $2P.B. Sw $4Copper spring about $2.5018650 batt $6.79 = http://www.madvapes.com/TrustFire-Protected-18650-Battery-2400-mah-_p_2753.html
great mod. I've been looking at the facorty 18650 batt mods, cuz like an idot I started out with a little ecig but I hate to spend money, and I thought I could do this and save a bunch. Going to HD when I get off work. and gonna make 4 or 5 of em for the guys at the fire station. thanks again
I have made a few coppers myself and you can check the links below. I love them! Thanks Mr. Breaktru!
Thanks again to Mr. Breaktru, I don't think I would have attempted this mod. if it had not been for your pix. and instructions. First. buy extra pipe and caps, your gonna screw a few up. even with a drill press there were a few caps destroyed in the process. extra parts, order a few, well the switches I bought were very large, they didn't look that big on the web site. oh well, I made due. my 510 connection, yea I ruined one of those as well. I wish I would have taken more pix, but this project took longer than I thought. for the positive terminal of the battery I used a center section of a large suction cup cut down to fit snuggly, with a screw in the center for the terminal and then I expoxyed it in the tube once I got it placed in the proper location. with the 18650 battery., All in all, it vapes like a choo choo train, and I love it. I got more switches on the way and plans to build more. I will take step by step pix next time. right now, I need to vape. thanks to everyone who has posted their mod.Ok, I can't figure out how to insert pix. any help. thanks