Author Topic: FREE POLYCARBONATE TUBING FOR TANK MODS (Read 23051 times)

timesarerough · « **on:** October 09, 2011, 08:42:13 PM »

You can get a free sample of the polycarbonate tubing needed for Dave's eJuice Tank Mod here:

http://www.petroextrusion.com/stocktubing.html

You can order whatever size you wish, but if you're building Dave's eJuice Tank Mod, PC-21 is exactly what you'll need.

So here's the sample form:

http://www.petroextrusion.com/sample.html

I'm not sure yet just how large or small your sample will be as I just now ordered it myself!

Breaktru · « **Reply #1 on:** October 09, 2011, 09:03:51 PM »

Nice find.
I am grateful for the link so members can get a freebee

timesarerough · « **Reply #2 on:** October 09, 2011, 09:18:45 PM »

Yeah, well I just knocked on Danco's door too.

So let's see if I can get everything?

timesarerough · « **Reply #3 on:** October 17, 2011, 03:45:21 PM »

Source confirmed!

Received a 12" PC-21 sample today.

Sweet-Vapors · « **Reply #4 on:** October 26, 2011, 06:53:47 PM »

I got my free foot of polycarb tubing, My first tank mod attempt was not so good! LOL but easy to see what I did wrong. The PC tube also cracked like crazy. that part does not leak, just my washers.

Now, I think I may actually have enough stuff to build my first VV mod, well everything except the time to get working on it! LOL Been working extra hours so I can buy more stuff for the store.

Thanks again for the find though! Much much much appreciated

Pantera · « **Reply #5 on:** October 26, 2011, 07:25:32 PM »

Quote from: Sweet-Vapors on October 26, 2011, 06:53:47 PM

I got my free foot of polycarb tubing, My first tank mod attempt was not so good! LOL but easy to see what I did wrong. The PC tube also cracked like crazy. that part does not leak, just my washers.

Now, I think I may actually have enough stuff to build my first VV mod, well everything except the time to get working on it! LOL Been working extra hours so I can buy more stuff for the store.

Thanks again for the find though! Much much much appreciated

Another good link from Times. Yippeee

I thought that the Polycarbonate material was virtually indestructible. I saw a video of a guy shooting it with a shot gun.

Breaktru · « **Reply #6 on:** October 26, 2011, 07:27:03 PM »

Like this one?

timesarerough · « **Reply #7 on:** October 26, 2011, 08:32:23 PM »

Quote from: Pantera on October 26, 2011, 07:25:32 PM

Another good link from Times. Yippeee

I thought that the Polycarbonate material was virtually indestructible. I saw a video of a guy shooting it with a shot gun.

Tru said he'd make a Side X Side for me if my Karma rating surpasses his....

HAMMER MY KARMA BUTTON BELOW MY AVATAR IF YOU DIG FREE STUFF!!

Breaktru · « **Reply #8 on:** October 26, 2011, 09:28:14 PM »

Quote from: timesarerough on October 26, 2011, 08:32:23 PM

Tru said he'd make a Side X Side for me if my Karma rating surpasses his....

HAMMER MY KARMA BUTTON BELOW MY AVATAR IF YOU DIG FREE STUFF!!

I'll Hammer your Karma....

timesarerough · « **Reply #9 on:** November 04, 2011, 01:57:28 AM »

Quote from: Breaktru Admin on October 26, 2011, 09:28:14 PM

I'll Hammer your Karma....

Well, then get on it Tru....Chop, Chop!

tek · « **Reply #10 on:** November 27, 2011, 09:31:17 PM »

I just tryed to order some pc-04 to make new er tanks for my liquidnator. Yes i broke down and bought a few, should of gone with the stainless, but just the regular plastic end caps, any way i had some winter green frost my tank up so i decided to break out the micrometer and mesure, the end result for the standard 3 mill liquinator, pc-04 and i cant wait to get it in..

thank you for this thread

timesarerough · « **Reply #11 on:** November 27, 2011, 11:36:37 PM »

You're welcome, Tek.

Sweet-Vapors · « **Reply #12 on:** November 28, 2011, 12:39:10 AM »

Glad to see you made it tek.

Tek made 2 of the box mods I use now.

tek · « **Reply #13 on:** November 28, 2011, 01:03:18 AM »

Quote from: Sweet-Vapors on November 28, 2011, 12:39:10 AM

Glad to see you made it tek.

Tek made 2 of the box mods I use now.

Heh, i only recently signed up, figured if i read here much more with out it i would just blow up. lol..

thanks for the welcome bro.

tek · « **Reply #14 on:** December 01, 2011, 11:39:53 AM »

Quote from: tek on November 27, 2011, 09:31:17 PM

I just tryed to order some pc-04 to make new er tanks for my liquidnator. Yes i broke down and bought a few, should of gone with the stainless, but just the regular plastic end caps, any way i had some winter green frost my tank up so i decided to break out the micrometer and mesure, the end result for the standard 3 mill liquinator, pc-04 and i cant wait to get it in..

thank you for this thread

Poly carb from that dist, pc-04 is a perfect match...

Sweet-Vapors · « **Reply #15 on:** December 01, 2011, 06:58:16 PM »

I ordered a sample of the HK-09 and he is sending me a small piece. He told me it runs about $2.92 a foot and is only sold in 100' coils, so would have to be straightened a little.

If it works well with my Anise and Cinnamon red hots, I may consider buying the 100' and sell it off in 1 foot pieces, heck, maybe just make some tank lengths and sell that, but will post here if it works out.

tek · « **Reply #16 on:** December 02, 2011, 10:39:19 AM »

Quote from: Christophet Smith on December 02, 2011, 04:11:35 AM

Thanks mate for posting a link for free sample. It is a good marketing strategy to that site to increase their visitors. Anyways, lots of websites that sells heat shrink tubing are now offering cheap prices. Just like this one http://www.cabletiesandmore.com/heatshrink.php
Cheers!

Yes, but there are free samples of heat shrink out there none the less, but this is a different type of tubing, it does not shrink.. This is clear tubing, non shrinkin ridgid poly carbonate for making a tank, or tank tube to hold e juice m8..

bamsbbq · « **Reply #17 on:** December 03, 2011, 10:21:25 PM »

new here...thanks so much for the link..free is good..lol

tsweetwater · « **Reply #18 on:** January 05, 2012, 11:18:46 AM »

awesome guys i just placed my free sample order, ty so much for all the help around here, n info

CraigHB · « **Reply #19 on:** January 06, 2012, 07:40:25 AM »

I love polycarbonate (Lexan). It's like the miracle plastic. The only thing I don't like about the stuff is it's pretty soft and scratches easy. If you want to use it for a view cover, you have to get the hard coated stuff, I forget the names for it. Acrylic is much harder and doesn't scratch as easily, but it's not nearly as tough.

AlleyKat · « **Reply #20 on:** January 18, 2012, 01:20:54 AM »

thanks for the links to the mats!! just paid for stuff & made my 1st tank....now I'm going to try these free sample links (being severely under-employed I can use all the freebies I can find for my "hobby").

stealfdawg · « **Reply #21 on:** January 18, 2012, 05:39:14 PM »

havent heard back from them yet hmm?

AlleyKat · « **Reply #22 on:** January 18, 2012, 05:50:39 PM »

not yet....just the standard automated email after I submitted the sample request. we shall see

let you know what happens. *side note: the grommet folks no longer give samples

got to buy, $10 min order aint too bad tho

Author Topic: ***FREE POLYCARBONATE TUBING FOR TANK MODS*** (Read 23051 times)

Author Topic: FREE POLYCARBONATE TUBING FOR TANK MODS (Read 23051 times)