gfxgfx
 
Please login or register.

Login with username, password and session length
logo
 
gfx gfx
gfx
16501 Posts in 1058 Topics by 3831 Members - Latest Member: Kysler October 23, 2014, 05:57:00 PM
*
gfx* Home | Help | Login | Register | gfx
gfx
Breaktru Forum  |  eCigarette Forum  |  Modding  |  Topic: OKR-T/6, T/3, T/10 and touch switches
gfx
gfxgfx
 

Author Topic: OKR-T/6, T/3, T/10 and touch switches  (Read 2319 times)

0 Members and 1 Guest are viewing this topic.

Offline SolarRay

  • Full Member
  • ***
  • Joined: Mar 2012
  • Location: MidWest
  • Posts: 48
  • Karma: +13/-0
  • Gender: Male
OKR-T/6, T/3, T/10 and touch switches
« on: April 19, 2012, 11:23:34 PM »
I noticed the OKR series from Murata is available in an "E" model....force enable.

 Could these be switched on via a logic level touch switch? Rather than a power MOSFET touch switch... Of course the design would have to included a Master switch.

Offline CapeCAD

  • Jr. Member
  • **
  • Joined: Feb 2012
  • Posts: 3
  • Karma: +8/-0
Re: OKR-T/6, T/3, T/10 and touch switches
« Reply #1 on: May 02, 2012, 10:22:20 PM »
Yes, but you can also add a 10k pull down resistor to the standard version and use a logic level touch switch.

Offline Pantera

  • Sr. Member
  • ****
  • Joined: Feb 2011
  • Location: Arizona
  • Posts: 87
  • Karma: +11/-0
Re: OKR-T/6, T/3, T/10 and touch switches
« Reply #2 on: May 03, 2012, 10:58:54 AM »
Yes, but you can also add a 10k pull down resistor to the standard version and use a logic level touch switch.

Thanks Cape for the advise. Do you have a drawing?

Offline jester

  • Sr. Member
  • ****
  • Joined: Dec 2011
  • Location: derby uk
  • Posts: 88
  • Karma: +14/-0
  • Gender: Male
Re: OKR-T/6, T/3, T/10 and touch switches
« Reply #3 on: May 03, 2012, 11:52:18 AM »
hi i am  sure that it is a 100k for the okr-t3 and a 10k for the okr-t 6 and 10 i thought that it was the 10k for all three but after reading all through the okr trend on the ecf i have found out that the okr-t-3 was 100k :beer-toast: jimmy

Offline CapeCAD

  • Jr. Member
  • **
  • Joined: Feb 2012
  • Posts: 3
  • Karma: +8/-0
Re: OKR-T/6, T/3, T/10 and touch switches
« Reply #4 on: May 03, 2012, 05:57:43 PM »
10k will work for the T/3 also

Offline jester

  • Sr. Member
  • ****
  • Joined: Dec 2011
  • Location: derby uk
  • Posts: 88
  • Karma: +14/-0
  • Gender: Male
Re: OKR-T/6, T/3, T/10 and touch switches
« Reply #5 on: May 03, 2012, 11:47:29 PM »
Thank you i was looking for this info aswell i will be testing this weekend i hope :thankyou:jimmy

Offline SolarRay

  • Full Member
  • ***
  • Joined: Mar 2012
  • Location: MidWest
  • Posts: 48
  • Karma: +13/-0
  • Gender: Male
Re: OKR-T/6, T/3, T/10 and touch switches
« Reply #6 on: May 04, 2012, 02:05:41 AM »
Thanks CapeCad, I have also been looking at depletion mode MOSFETS, It can act as a "normal closed" transistor based switch. But a 10k resistor sounds easier.  Anyone know where to get the E model? it seems impossible to get anyway.... A solution with the standard model seems more practical.

Offline yogi

  • Full Member
  • ***
  • Joined: Mar 2011
  • Posts: 32
  • Karma: +3/-0
Re: OKR-T/6, T/3, T/10 and touch switches
« Reply #7 on: December 05, 2012, 08:12:27 AM »
I have been looking for the OKR-T/6-W12E-C and can't find any. This is the "Forced Enabled" model.

Breaktru Forum  |  eCigarette Forum  |  Modding  |  Topic: OKR-T/6, T/3, T/10 and touch switches
 

gfxgfx
gfx gfx
Powered by MySQL Powered by PHP Valid XHTML 1.0! Valid CSS!