0 Members and 7 Guests are viewing this topic.
Great work I should say. What PCBs are you using?
The board is mounted horizontally and so is the display. The display is parallel to the board.The DNA 30 and 20 is made for a tube and yes it will fit a 3/4" tube
So putting a 180` bend on the ribbon cable inside a 3/4" copper tube will not stress it too much? I'm assuming it has the flexibility of the type of ribbon cable that you would find attached to laptop keyboard then.
In a tube, you will fold the display over the board where the back of the display sits on top of the Inductor. A piece of double sided foam tape should be used to hold the back of the display to the inductor.Like this --> HEREIt should not put stress on the cable.
Thanks afex. PCB as in Protection Circuit for the batteries? I'm using (2) SMD 7A hold, 6v PTC fuses. One in each positive leg of Li-Po batteries.
Can I use 2 RUEF700 in parallel? They have same amps specs but 30V instead of 6V. I am building my first mod and I think it's hard to solder those small ones you used...
how do you mount the pcb mount tactile switch to the case?
do you have the supplier and part number for the switches?
hi breaktru..im now have a chip dna 30,hammond box,battery efest 18650 x2 rated 35A each..i juz wanna ask how do i parallel those battery?what fuse should i use?ive seen many tutorial n pic but still cant understand how..can u provide some callculation about my setup and how i parallel my battery since this gonna blow my if i do mistake about choosing fuse
Great job on the mod! Looks clean I'm working on mine as well. I should have some photos later this week.Question... Did you have to fabricate your display window/cradle or is there a website/place I can purchase one. this is the only thing I do not have planned out.. any help would be great!
I have a bunch of new products in my Shapeways store https://www.shapeways.com/shops/bapgood
That's fantastic baps. This will help a lot of modders. I'm assuming you made the charger port hole for the DNA charger (micro) and not for the 1A mini port.
I still need to go in and add some pictures/descriptions/etc. But everything with a light pipe hole is for the DNA charger and everything without is for the MICRO 1amp USB charger.
I got mine here http://www.ebay.com/itm/221355237744?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649But if your patient you can get them cheaper from china.
I like the Mini because it's beefier.
Hey guys im new here and im in the process of getting up my materials for my first mod build. I plan on doing a dna 30 setup.I have a question if you guys dont mind helping me with.1. Im wanting to use a lipo battery What type of setup would i need to run a high mah battery like 4400 or 5600 and will the charger that evolv sells be ok to use with or no.
I'm meant to be saving money and then I join this forum ... gee thanks .. dna 30 on the way and its all your fault .Atb