0 Members and 2 Guests are viewing this topic.
Choose one of the 4 positions and press the button for 1 sec.Position 1: 27 Volts for wires 0.13 - 0.16Position 2: 31 Volts for wires 0.17 - 0.18Position 3: 35 Volts for wires 0.2 - 0.23Position 4: 41 Volts for thicker wireThis looks like the same DC-DC Step-Up converter: EBAY
Hi, I am new to the forum, from Croatian, bad English ... I do welding wire, commissioned by the module, I would ask, how-on 4.2 V battery module can be activated when it is the minimum input voltage of 4.5 V ?, I ga I use with 30V, electrolytic capacitor, which is better for this voltage, 1000mF/50V or 2200mF/50V?, which specifically battery use, and give just one or two in the series? ... lots of questions, I hope you will not be a problem to answer, thanks in advance...
A big thank you, regards
One more thing, is this: http://www.ebay.com/itm/130770051722?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 and this: http://www.ebay.com/itm/160964471344?ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2649 same, identical? btw. on E-bay has only the first
...obvious that someone is lying
Then I screwed up, I ordered this to 42V, I thought they were the same, this does not have to 60V ... the wretched
Then it's okay, I thought that your module to 60V, now I sleep better, tnx and good night ...
Which batteries prefer to welding machine?
I may not be well connected the switch and button, a switch in series with the battery and switch IN, and the key is in series with the electrolytic capacitor and go on out, I think you need to switch and go to the key series on IN and OUT on the electrolyte, accurate ?
I've just joined so with the same module, except battery-2x3, 7V in series, capacitor 1000mF/50V without resistor / add I /, the problem is that after every welding must click the switch OFF-ON to continue to brew it again .. . why?
I am quite new to this field. I am just wondering if we could modify it for more than 42V. I would like to use it for 60V, do you think it’s possible?
This diagram/schematic shows parts like bapgood was using but w/ the YH11053A instead of the LM2577.
Hello Breaktru , i'm new from France, i have ordered this one on eBay ( YH 11053A)What capacitor do you think it's better??? 1000 , 2200 or 4700uF???Thanks a lot ,your forum is very nice
Thanks I didn't see the topicsI saw the one ,on the spark o matic ,but 300v seems to me a little bit dangerous