small vv mod print

[Zoiboi]

Just got one of these http://dx.com/p/mini-3a-4-5-28v-to-0-8-20v-step-down-voltage-regulator-green-24
Put 2x 14500 on it and it works....Used to work with lm2596 but found it to big.....

[Lee1111]

link points to a bluetooth dongle 

[CraigHB]

Here's a good link I think;

http://dx.com/p/mini-3a-4-5-28v-input-0-8-20v-output-step-down-voltage-regulator-green-238815

Looks like it should do the job for light loads, good for standard resistance atomizers with a couple 14500 cells.  Though like most Chinese modular parts, it's sorely lacking on documentation.

[Zoiboi]

Sorry for the wrong link....
http://dx.com/p/mini-3a-4-5-28v-to-0-8-20v-step-down-voltage-regulator-green-245131
This should be the right one....

Been vaping since ysterday on the board with 2 x14500 and it seems to do the trick  (2.1 Ohm coil)

[Breaktru]

Nice Zo 
Maybe a sleeker tank on top would streamline it a bit.

[Zoiboi]

I know....Think i will cut it a little on the top for a better fit/look....or maybe just make one more, i got 3 of the boards.....

[Visus]

Its definitely as small as I thought
wow nice board find

3amps -its as powerful as a provari, how does it vape?

[kortt]

That's small for sure.  Keep us posted on how it works out.

I think these are the same ones as Craig linked to...was looking at them a while back.
http://www.ebay.ca/itm/360751498046?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

[Visus]

Nice Zo 
Maybe a sleeker tank on top would streamline it a bit.

How many read Breaks comment and thought of a mod atomizer tank called a "sleeker tank", totally blocking out the definition sleek.   
I googled sleeker tank -- 'oh another mod --lets check it out'. ..

[Zoiboi]

24 hours of vaping (didn't get much sleep last night) and still going strong with a nice and smooth vape on the iclear 30....
This is absolutely my favorite mod, never thought i would be so happy. But it handles like it should an has a perfect fit in the hand.
Found out that the pot  is a 10 k and I'm thinking of putting a more "Handy " pot on to get better access to the vv part of the board (i`m vaping at 4v)...

Oh BTW....Merry Christmas to all of you......

[Breaktru]

That's pretty good results. Using an off board pot would be great to mount in the case.

Merry Christmas to you too and congrats on your build

[been there]

Hey everybody,Been a member of this forum for a while don't post much but anyway I bought a bunch of those boards from eBay and they work great at least on a bread board except the pot it's a little touchy as Breaktru suggested a off board pot is a good idea at least that's what I'm going to do as soon as I figure out what I'm going to put it in,I've had builders block for a while and can't seemed to get going. And Merry Christmas   

[warlordxxx]

As previously stated the pots on the board is garbage - The pot is 200K Ohm if anyone needs to know to fit an external

[Breaktru]

I would think that they would use the cheapest components available considering the price of the board

[warlordxxx]

Very true Breaktru - You can only expect so much for the price of them and i've come across the same pot on volt meters - even pressing on it slightly and it changes - But at least it's simple enough to de-solder and put a fresh external pot on there and again for the money the rest of the board is pretty good

[been there]

I agree  The boards are descent but again you get what you pay for.

[Zoiboi]

Finally found "A sleeker tank".....Finer adjustment to the top.....

Still my best mod/battery ever.....

[Breaktru]

  Now that is sweet