Breaktru Forum

eCigarette Forum => Modding => Parts for Mods => Topic started by: bapgood on January 09, 2014, 05:46:54 PM

Title: DNA Screen and Volt Meter Housings at Shapeways
Post by: bapgood on January 09, 2014, 05:46:54 PM
Thought this should be here, plus I just put on 5 new DNA housings that are a little bit different design.


New design w/stop in options for 1.5mm/2mm/3mm/4mm/5mm panel thickness

https://www.shapeways.com/model/1620023/dna-screen-housing-w-stop-1-5mm (https://www.shapeways.com/model/1620023/dna-screen-housing-w-stop-1-5mm)

https://www.shapeways.com/model/1619638/dna-screen-housing-w-stop-2mm (https://www.shapeways.com/model/1619638/dna-screen-housing-w-stop-2mm)

https://www.shapeways.com/model/1620002/dna-screen-housing-w-stop-3mm (https://www.shapeways.com/model/1620002/dna-screen-housing-w-stop-3mm)

https://www.shapeways.com/model/1620026/dna-screen-housing-w-stop-4mm (https://www.shapeways.com/model/1620026/dna-screen-housing-w-stop-4mm)

https://www.shapeways.com/model/1620027/dna-screen-housing-w-stop-5mm (https://www.shapeways.com/model/1620027/dna-screen-housing-w-stop-5mm)



Volt Meter Housing

https://www.shapeways.com/model/1547500/volt-meter-housing (https://www.shapeways.com/model/1547500/volt-meter-housing)


Original Mamu Housing and 5mm Housing

https://www.shapeways.com/model/990301/mamu-s-dna20d-screen-cradle (https://www.shapeways.com/model/990301/mamu-s-dna20d-screen-cradle)

https://www.shapeways.com/model/1186745/mamu-housing-5mm (https://www.shapeways.com/model/1186745/mamu-housing-5mm)
Title: Re: DNA Screen and Volt Meter Housings at Shapeways
Post by: Breaktru on January 09, 2014, 06:32:43 PM
Thank you so much for sharing this with the crew here Bap.  :rockin smiley:
I have used a couple for the DNA and the DM. They were great. Great design skills Bap :applaude:

P.S.
Do you think maybe I should move this over to the "Parts For Mods" section?
Title: Re: DNA Screen and Volt Meter Housings at Shapeways
Post by: bapgood on January 09, 2014, 06:39:43 PM
I'll leave that up to you. I'm good with where ever :D
Title: Re: DNA Screen and Volt Meter Housings at Shapeways
Post by: Breaktru on January 09, 2014, 06:45:45 PM
TOPIC: MOVED to Parts For Mods
Title: Re: DNA Screen and Volt Meter Housings at Shapeways
Post by: bapgood on February 24, 2014, 07:03:10 PM
Added a housing for the 0.28" digit volt meter at shapeways - https://www.shapeways.com/model/1736356/volt-meter-housing-0-28-quot-digit.html (https://www.shapeways.com/model/1736356/volt-meter-housing-0-28-quot-digit.html)
Title: Re: DNA Screen and Volt Meter Housings at Shapeways
Post by: jeandbean on March 02, 2014, 11:33:07 AM
That's great of you baps to share this with us  :thankyou:
Title: Re: DNA Screen and Volt Meter Housings at Shapeways
Post by: Breaktru on March 07, 2014, 12:03:52 PM
Great baps, Thank you
Title: Re: DNA Screen and Volt Meter Housings at Shapeways
Post by: kurtus on March 07, 2014, 12:18:41 PM
Deadly baps, thx
Title: Re: DNA Screen and Volt Meter Housings at Shapeways
Post by: kurtus on March 07, 2014, 01:13:08 PM
Quote from: bapgood on March 07, 2014, 11:53:03 AM
Attached is a PDF for the DNA screen housing with stop. Should be easier to see.
I'm having a hard time printing this so I can have plexi screens made, it want to print on an 11x17 paper so I get half the print on 11x14 which is the biggest I can print. 8x11 is ideal and it would be nice to see the 1.1 cutout and screen dimensions on the document too like the original one u did....I'm asking for too much aren't I lol :thumbsup:
Title: Re: DNA Screen and Volt Meter Housings at Shapeways
Post by: bapgood on March 07, 2014, 01:21:46 PM
Quote from: kurtus on March 07, 2014, 01:13:08 PM
I'm having a hard time printing this so I can have plexi screens made, it want to print on an 11x17 paper so I get half the print on 11x14 which is the biggest I can print. 8x11 is ideal and it would be nice to see the 1.1 cutout and screen dimensions on the document too like the original one u did....I'm asking for too much aren't I lol :thumbsup:

I didn't think about that, but it has the dimension on it???

If I get some time later I will update them to 8.5"x11"
Title: Re: DNA Screen and Volt Meter Housings at Shapeways
Post by: kurtus on March 07, 2014, 02:24:02 PM
I managed to manipulate it with my printing software so I can now clearly see the dimensions thx. I used the screen cutout 1.1 as a template to cut my screens opening. Thx Kurt