Breaktru Forum

eCigarette Forum => Modding => Topic started by: wreck on February 26, 2014, 05:38:35 AM

Title: My OKR-T/6 box
Post by: wreck on February 26, 2014, 05:38:35 AM

Hi all, I've not posted a whole lot on here, but have been reading a lot for the last few months.

I thought I'd share my first proper VV build with you all.

I've made a couple of DNA20 boxes already, but wanted to make a small mod using the OKR-T/6 chip using the schematics from the thread on this forum.

I used a hammond 1550Q box as the basis of my mod, and made a custom door out of spalted birch. Initially I didn't want the pot poking through the door, but I didn't measure everything up quite right and it wouldn't fit down the left hand side of the 510 connector as I had initially planned  :laughing:

It runs off two 18350 batteries, and I'm pretty pleased how it came out, and I'm looking forward to trying some of the other ideas I've got from this great forum :)

(http://i.imgur.com/iWE1ReG.jpg?1)

(http://i.imgur.com/l6QWC12.jpg?1)

(http://i.imgur.com/hlwXfI7.jpg?1)

(http://i.imgur.com/WGMBhg9.jpg?1)



Here's a quick photo of the DNA20 boxes I have built previously too

(http://i.imgur.com/o634uWl.jpg?1)

Title: Re: My OKR-T/6 box
Post by: Breaktru on February 26, 2014, 06:57:48 AM

Great work and congratulations  :beer-toast:
Thanks for sharing your mods with us  :rockin smiley:

Title: Re: My OKR-T/6 box
Post by: wreck on February 26, 2014, 07:00:58 AM

Thanks :D

Title: Re: My OKR-T/6 box
Post by: vapemistress on February 26, 2014, 08:01:51 AM

Very nice wreck. It came out well  :thumbsup: