Breaktru Forum
eCigarette Forum => DIY eJuice => Topic started by: scottericsonon on March 10, 2014, 08:44:00 PM
-
I think so anyhow.....
I ordered up a few "free samples" of the glass syringes shown here http://www.nationalscientific.com/filtration/products.aspx?id=112
Using the "sample" form here
http://www.nationalscientific.com/products/samples.aspx
I got an email from them today showing what looks (to me) to be a purchase order so with fingers crossed I'm standing by the mailbox (not really but you get what I mean)
I ordered a 1 mil, 2.5 mil, 5 mil and a 10 mil....
In retrospect I should have grabbed a 25 as well although I doubt I'd use it since most of my juice "batches" are only 30mil at the most
Hopefully these will work good for me.... I run into problems with the plastic ones with the measurement numbers coming off
-
Nice find Scott. Let's see what happens. Put in a couple of samples too :thankyou:
-
Those syringes look like they would be great for super small volumes. Going to try for a few samples as well. Thanks for the heads up.
-
To all of you who are having problems with the marking on your syringes wearing out. All you have to do is coat them with clear nail polish and make sure it is completely dry before using. Viola, no more problems. Hope this helps.
-
To all of you who are having problems with the marking on your syringes wearing out. All you have to do is coat them with clear nail polish and make sure it is completely dry before using. Viola, no more problems. Hope this helps.
Damn..... That's a good idea....
-
Just put in a request myself. Let's see what happens.. Thanks for the info brother.
-
Just wanted to let you guys know that I received my glass syringes today and they're really really nice....
I smeared a little pg on the plunger seal for lubrication inside the bore and they seem to work smooth as silk
-
That was quick Scott. Nice.
I too lubricate my plunger seals after washing them. I use vg.
-
WOW, that is some really fast shipping, especially for something that's free.
-
Yeah no kidding..... They sent them via ups
Did anyone else get an email response from Dana in the samples dept yet?
I put in my order over the weekend and had an email from them on Monday
-
I have not heard a peep from them and that makes me think I will not be receiving any samples. Usually I get at least a confirmation or follow-up note after requesting samples. But, won't give up hope for a while.....
-
I ordered them Monday and got a response the same day. ;cheers;
-
Just ordered some up, where are you guys getting threaded blunt tips?
-
Just ordered some up, where are you guys getting threaded blunt tips?
I bought mine from Wizard Labs when I ordered my nic and pg/vg.....
But almost any of the DIY suppliers should have them.. Just make sure you get the Luer-Lok
-
I found a great deal for dispensing tips on fleabay. Can't remember what section, but I'm sure a search will turn them up.... that's how I found mine. The seller is CML. For ~$13 you get an assortment of 100 pieces including luer lock metal blunts and ll plastic tips (handy for both DIY and filling Kayfun type attys). I know it ain't free, but when you see Wizard Labs selling needles for .65, the 13 bucks really looks good. Just my two cents.....
-
For sure get the Luer lock tips and syringes, that's a must. I use the needles on my gennies so I don't have to take the top off to refill, just the tip. You can get Luer lock caps for the plastic 30ml bottles and it works really well for refilling. I've found the 16 gauge 1-1/2" needles work the best, but those can be hard to find. Last time I just bought some sharps and filed the tips blunt. Think I got them off fleabay.
I also use the 18 ga plastic dispensing tips. I use those when I flush my gennies. Using a syringe and a dispensing tip, I flush them through the fill hole with water then rubbing alcohol then blow them dry through the fill hole with compressed air. Finally a dry burn. It gets the coils super clean that way and cleans the whole tank too.
-
Just received these today. Purchased 50 needles for total cost of $13.00 on ebay. Thanks to all who shared in this knowledge of the free syringes. I also got the 25 ml one as I buy my nic in 100 mg bottles and cut it. Again, thanks to all.
-
Ordered two of each except for the 2.5 ml ones. I'll update if and/or I get these.
Nice find OP.
Update:
Email recieved today that they are sending me one each of the 1, 5, & 10 ml syringes.
-
Just ordered some myself. Hope it works. How much and what info did you put on the request?
-
Thanks for this post. :thumbsup:
I ordered some a while back and no dice, forgot about it. Today they sent an email advert of new products and I said hmn, why not try it properly.. As always there's a recipe to sampling products. Point to point connection.
Dana has the weirdest last name of any person ever, she's nice lol.
See how quickly they hit me mailbox, hopefully beat your two days and tomorrow they are here.
I ordered the glass syringe 10ml, and multiple plastic in 5 10 40ml @100 &40 in the packages so should last good while.
Also the 20ml amber glass screw top vials.
Seem to be a theme going on, my led samples were addressed to the devil and now my best choice glass syringe is numbered NS600066 :Thinking:
I am the best musician there ever could be right after Charlie Daniels so think maybe being a-challenged not sure but lol. woot love challenges
Unfortunately she's smarter than that, off topic/real topic rant over ;)
-
OK, I ordered these several months ago and tried to order them again but they said they had no deals going on. Looks like they brought them back. I'll let you guys know if they are starting to send them out again. God bless all of you and yours.
-
Whoa,
(https://lh4.googleusercontent.com/-NHENF3bgf1g/U-lRnqWw6tI/AAAAAAAAAHM/wYzaj8AKj3I/w426-h568/14%2B-%2B1)
Thanks for this post
-
Eureka! Nice score Visus