Breaktru Forum

eCigarette Forum => Modding => Topic started by: Romelee on March 11, 2014, 03:39:40 PM

Title: Fuse legs
Post by: Romelee on March 11, 2014, 03:39:40 PM

Hi all,

I have loads of these that i want to use up before i move onto a different fuse and was wondering, is it safe to bend the legs on them as they are very long and it would make life easier if i could bend them.

I just want to bend 50% of the leg around the corner of the battery holder, if it's not safe and not doable then not a problem.

I would love to just cut them too size but i presume they are that length for a reason.

This is the fuse: http://www.digikey.co.uk/product-detail/en/RGEF600-2/RGEF600CT-ND/3592635

Title: Re: Fuse legs
Post by: Mandro on March 11, 2014, 04:16:05 PM

I've been cutting all of mine. I can't see a problem with cutting them.

Title: Re: Fuse legs
Post by: Breaktru on March 11, 2014, 04:19:03 PM

I cut all of mine down to as short as possible. Shorting the length does not effect rating specs

Title: Re: Fuse legs
Post by: Romelee on March 12, 2014, 03:00:47 AM

That's fantastic news, thanks all :rockin smiley: