Breaktru Forum

eCigarette Forum => Modding => Topic started by: memoevapor on May 07, 2014, 06:59:17 AM

Title: PTN04050CAH Question
Post by: memoevapor on May 07, 2014, 06:59:17 AM

Have a free sample PTN04050CAH and it has pins to mount to a board. I was thinking about mounting it to a Mini Pre Cut Interconnect Circuit Board. Can someone suggest a link to help with this? I have been unable to find one. ANY ideas or suggestions would be appreciated!! :yes"

Title: Re: PTN04050CAH Question
Post by: Breaktru on May 07, 2014, 09:32:57 AM

The pins will not align to a pre-made circuit board. Soldering directly to the pins is what I do.
If you insist on using a circuit board, you will have to  make your own PCB (http://breaktru.com/smf/index.php/topic,596.msg3874.html#msg3874)

Title: Re: PTN04050CAH Question
Post by: rhay80 on May 07, 2014, 05:30:32 PM

i have only built 2 mods using the 04050 chip, as breaktru said it is easier to just solder straight onto the posts, it means you can also fit it into a smaller space than you would expect :)

Title: Re: PTN04050CAH Question
Post by: memoevapor on May 07, 2014, 08:34:34 PM

Thanks Breaktru and rhay80! this is my first non mechanical mod. I just want to get it right.   :thankyou: