Breaktru Forum
eCigarette Forum => Modding => Topic started by: ghh3rd on June 03, 2015, 09:46:49 PM
-
I would like to find a source for "potentiometer dial plates" or "potentiometer scale plates" or whatever else they may be called :) so I can glue it to my mod and easily return the pot to the same position.
My 200 ohm potentiometer dial is 9mm wide so I guess a plate with a 3/8" hole should work.
Thanks for any leads.
Randy
-
Here's an idea from the man himself the don of e cig mods he is guy before the guy who made every mod ever. Raidy's scale was made with a laser printer and thin clear plastic sticker.
A modders must read https://www.e-cigarette-forum.com/forum/threads/all-my-mods-part1.132663/
He is the guy who created the genesis atomizer and many many other high tech mods.. Cannot imagine what mods he has now its his passion/hobby extreme to build and post it for free but many companies started stealing/selling his ideas that were shared freely.. Its a great read as you see the industry steal his mods and how he and us reacted etc etc. It was unbelievable..
His last project was to build a pressure regulated device that would subohm or not depending on how hard you inhaled it would give ya more powah. He also built a mod with a reed switch and i find that awesome...
(http://file.walagata.com/w/mysticx/raidy_impb2_range_.jpg)
-
Thanks for the reply .... read it some time ago and found Raidy's work interesting.
Still wondering if anyone else has put a scale plate over their potentiometer, and if so which one they used and where they got it.
-
What about making one using decal paper or a water slide decal or you could find a large aluminum washer and print the dial using a laser printer on toner transfer paper and then acid etch it. There's plenty of info on Google and the etching way would look awesome...
Gl