Breaktru Forum

eCigarette Forum => Modding => Topic started by: david4500 on July 16, 2016, 07:49:18 PM

Title: Cloudmaker Whiteout aluminum frame with custom acrylic panels and PWM board
Post by: david4500 on July 16, 2016, 07:49:18 PM
Acrylic - http://www.mcmaster.com/#4615t72/

No laser. Made some templates, scored, snapped, sanded, drilled, countersunk, epoxied magnets for the front cover.

(http://i.imgur.com/sMHPCJp.png)

(http://i.imgur.com/LSHfOxk.png)

(http://i.imgur.com/XuhTxUl.png)

(http://i.imgur.com/QhkaYHG.png)

(http://i.imgur.com/5YOK0qz.png)

(http://i.imgur.com/H6Oogxl.png)

(http://i.imgur.com/UoHhPKl.png)

(http://i.imgur.com/wtObYv9.png)

(http://i.imgur.com/mjH8tDt.png)

(http://i.imgur.com/M4BU5kp.png)

(http://i.imgur.com/nnFg3Ff.png)

(http://i.imgur.com/MKKvlg0.png)
Title: Re: Cloudmaker Whiteout aluminum frame with custom acrylic panels and PWM board
Post by: david4500 on July 16, 2016, 11:34:46 PM
3d printed parts for the Whiteout - https://www.shapeways.com/designer/wolkehersteller/creations

All .STL models are downloadable
Title: Re: Cloudmaker Whiteout aluminum frame with custom acrylic panels and PWM board
Post by: david4500 on July 16, 2016, 11:38:27 PM
Files/project for a full laser cut panel/cover set for the Whiteout DNA - http://www.ponoko.com/showroom/wolkehersteller/
Title: Re: Cloudmaker Whiteout aluminum frame with custom acrylic panels and PWM board
Post by: david4500 on July 18, 2016, 03:05:30 PM
The 12mm stainless steel fire switch from Alpinetech

(http://i.ebayimg.com/images/g/fDEAAOSwdzVXjSEV/s-l1600.jpg)

http://www.ebay.com/itm/ATI-1205-12mm-Clicky-Low-Profile-PushButton-Switch-for-Box-Mods-Shallow-Depth-/322196703044
Title: Re: Cloudmaker Whiteout aluminum frame with custom acrylic panels and PWM board
Post by: SDaddy on July 18, 2016, 08:25:48 PM
Quote from: david4500 on July 18, 2016, 03:05:30 PM
The 12mm stainless steel fire switch from Alpinetech

(http://i.ebayimg.com/images/g/fDEAAOSwdzVXjSEV/s-l1600.jpg)

http://www.ebay.com/itm/ATI-1205-12mm-Clicky-Low-Profile-PushButton-Switch-for-Box-Mods-Shallow-Depth-/322196703044

That is a nice switch. It's the same one I used on my last project. The David4500 DPM1.4 -CMOS in a Black ABS 1591 case.
Title: Re: Cloudmaker Whiteout aluminum frame with custom acrylic panels and PWM board
Post by: david4500 on July 18, 2016, 11:20:59 PM
Very cool thanks for sharing. Are you using a lipo in the mod? Have only personally used dual 18650s with any of my boards. Used a lipo once with a DNA200, one cell went bad, kind of soured using them for me.
Title: Re: Cloudmaker Whiteout aluminum frame with custom acrylic panels and PWM board
Post by: SDaddy on July 19, 2016, 12:45:12 AM
Quote from: david4500 on July 18, 2016, 11:20:59 PM
Very cool thanks for sharing. Are you using a lipo in the mod? Have only personally used dual 18650s with any of my boards. Used a lipo once with a DNA200, one cell went bad, kind of soured using them for me.

3.7v lipo in that one. Otherwise, All my mods (which all have a board of one type or another designed by You) are using 7.4v lipos (1200 to 1500 mAh 2S's).  I've only had one go bad in the last year, and that was my 1st attempt to make my own 2S's from two 3.7's.  No issues otherwise!