Breaktru Forum

eCigarette Forum => Modding => Parts for Mods => Topic started by: timesarerough on December 06, 2011, 09:28:39 PM

Title: ***FREE MOD BUILDING ENCLOSURES FOR DIGITAL METERS***
Post by: timesarerough on December 06, 2011, 09:28:39 PM

Enclosures anyone?

http://hammondmfg.com/

This was my particular area of interest:

http://www.hammondmfg.com/dwg9.htm

PN's:

1551NBK
1551NGY
1551NTBU

http://www.hammondmfg.com/1551TBUptbl.htm

You can requests samples of whatever size you wish, but I use the part numbers shown for building micro DM's (Digital Voltmeter). Be warned, its a TIGHT squeeze and they're veeeeery difficult to build!! Not for a novice builder.....

You MUST have a certain kind of LED DM for these tiny enclosures, otherwise you'll have to significantly modify the enclosure to get the DM to fit (Bad Idea). Some DM's won't fit at all, so very careful what you buy....

Good Luck!

Title: Re: ***FREE MOD BUILDING ENCLOSURES FOR DIGITAL METERS***
Post by: timesarerough on December 07, 2011, 03:45:59 PM

AND DON'T FORGET TO CLICK MY APPLAUSE BUTTON IF YOU DIG FREE STUFF!!!   :thankyou:

Title: Re: ***FREE MOD BUILDING ENCLOSURES FOR DIGITAL METERS***
Post by: Nago Suka on February 05, 2013, 05:56:33 AM

Where can you ask for samples? Can't find it...

Title: Re: ***FREE MOD BUILDING ENCLOSURES FOR DIGITAL METERS***
Post by: Breaktru on February 22, 2013, 09:27:07 AM

Quote from: Nago Suka on February 05, 2013, 05:56:33 AM

Where can you ask for samples? Can't find it...

What I think Timesarerough is saying is you can request them. Probably HERE (http://www.hammfg.com/contact)

Title: Re: ***FREE MOD BUILDING ENCLOSURES FOR DIGITAL METERS***
Post by: Nago Suka on February 22, 2013, 09:54:21 AM

Quote from: Breaktru on February 22, 2013, 09:27:07 AM

What I think Timesarerough is saying is you can request them. Probably HERE (http://www.hammfg.com/contact)

Ok. Thanks!

Title: Re: ***FREE MOD BUILDING ENCLOSURES FOR DIGITAL METERS***
Post by: mick8844 on August 22, 2013, 07:59:02 PM

Hey, Timesarerough,

I was wanting to build a ohms/ volt meter to work on a 510 connection on both sides. do you or anyonehave a drawing and parts list for one. This is something that I really want to build.

Thanks   Mick8844

Title: Re: ***FREE MOD BUILDING ENCLOSURES FOR DIGITAL METERS***
Post by: methos on August 22, 2013, 09:40:43 PM

Quote from: mick8844 on August 22, 2013, 07:59:02 PM

Hey, Timesarerough,

I was wanting to build a ohms/ volt meter to work on a 510 connection on both sides. do you or anyonehave a drawing and parts list for one. This is something that I really want to build.

Thanks   Mick8844

I second that  :D
I would like to build one as well

Title: Re: ***FREE MOD BUILDING ENCLOSURES FOR DIGITAL METERS***
Post by: Dasen22 on August 23, 2013, 07:42:23 PM

I don't think there is one for both ohms and volts. It's either/or

Title: Re: ***FREE MOD BUILDING ENCLOSURES FOR DIGITAL METERS***
Post by: mick8844 on August 24, 2013, 12:27:38 AM

well ten oneof each would bevary handy

Mick8844

Title: Re: ***FREE MOD BUILDING ENCLOSURES FOR DIGITAL METERS***
Post by: timesarerough on August 24, 2013, 11:13:37 PM

Sorry, I'm not a schematic guy...ask Breaktru if he could draw one up for ya.

But you'll have to tell him which DM that you plan on using.  :yes"

Title: Re: ***FREE MOD BUILDING ENCLOSURES FOR DIGITAL METERS***
Post by: Cujo on June 20, 2014, 12:02:50 AM

Are the files for these floating around anywhere? .STL or other? I'd love to print my own. This is such a great design. Heck, I'd even pay a few $ to get just the files.

Title: Re: ***FREE MOD BUILDING ENCLOSURES FOR DIGITAL METERS***
Post by: elzakivis on June 20, 2014, 07:16:58 AM

Quote from: Cujo on June 20, 2014, 12:02:50 AM

Are the files for these floating around anywhere? .STL or other? I'd love to print my own. This is such a great design. Heck, I'd even pay a few $ to get just the files.

???
What design are we referring to? A digital meter in an enclosure?

Title: Re: ***FREE MOD BUILDING ENCLOSURES FOR DIGITAL METERS***
Post by: Cujo on June 20, 2014, 11:34:15 AM

Quote from: elzakivis on June 20, 2014, 07:16:58 AM

???
What design are we referring to? A digital meter in an enclosure?

It seems that I posted on the wrong topic. I may just be an idiot. I was talking about the DNA30 screen cradle by Mamu. Sorry.  Doh: