Breaktru Forum
eCigarette Forum => Modding => Parts for Mods => Topic started by: Breaktru on August 05, 2012, 06:10:20 PM
-
I started out with free samples but now buy from a Distributor.
Here is a list of Distributors. The cheapest place is Arrow Electronics. You have to create an account. The shipping is outrageously high so check out these other distributors.
PTN04050C Distributors (http://octopart.com/ptn04050cad-texas%2Binstruments-581125)
-
First, Thanks for having this forum and letting me on it.
The PTN04050C - Boost DC-DC Converter, may be just what I have been looking for.
I really like the "Puck" NIMH Mods.
I have been looking for something that would stabilize the output.
The sweet spot on a 4 battery puck is right around 5 volts.
This converter should work just fine.
I will let ya know as I go along
Lonnie
-
First, Thanks for having this forum and letting me on it.
The PTN04050C - Boost DC-DC Converter, may be just what I have been looking for.
I really like the "Puck" NIMH Mods.
I have been looking for something that would stabilize the output.
The sweet spot on a 4 battery puck is right around 5 volts.
This converter should work just fine.
I will let ya know as I go along
Lonnie
Hi Lonnie, nice to have you here in this little group of modders. ;cheers;
The 04050c is a nice simple way to boost a single cell battery and keep the mod size down.
-
Lonnie,
Please create a New Topic in Modders category and post your question after making a 3rd post.
Thanks,
breaktru
-
I was digging Farnell for this module, and found CAZ version:
http://pl.farnell.com/texas-instruments/ptn04050caz/ic-isr-6w-smd-4050/dp/1109720
it's of much higher availability (at least in polish warehouse). It's the same module, just in SMD version - but soldering pods for wiring are quite big :)
-
I was digging Farnell for this module, and found CAZ version:
http://pl.farnell.com/texas-instruments/ptn04050caz/ic-isr-6w-smd-4050/dp/1109720
it's of much higher availability (at least in polish warehouse). It's the same module, just in SMD version - but soldering pods for wiring are quite big :)
Thanks utak3r for the posting of availability and welcome to the forum.
Yes there are 4 Mounting Type. Two are through-hole (CAD and CAH) and two are surface mount (CAZ and CAS). They are identical circuit wise.
I use the surface mounts when I don't have the space but are harder to solder wires to.