Breaktru Forum
eCigarette Forum => Modding => Topic started by: Breaktru on December 25, 2012, 03:43:47 PM
-
ZMAX - How To Remove Top Cap For Repair
Needed:
Long Thin Screw Driver or Tool.
Mallet / Hammer
(http://breaktru.com/ecig/z_repair01.jpg)
(http://breaktru.com/ecig/z_repair02.jpg)
(http://breaktru.com/ecig/z_repair03.jpg)
(http://breaktru.com/ecig/z_repair04.jpg)
(http://breaktru.com/ecig/z_repair05.jpg)
(http://breaktru.com/ecig/z_repair06.jpg)
(http://breaktru.com/ecig/z_repair07.jpg)
(http://breaktru.com/ecig/z_repair08.jpg)
(http://breaktru.com/ecig/z_repair09.jpg)
-
http://www.youtube.com/watch?v=ywj64z-IaMI (http://www.youtube.com/watch?v=ywj64z-IaMI)
-
I'd like to mention that, you should put a tiny drop of hot glue on the outside of the Lens Cover where it meets the display to hold the cover from popping off. Use Hot Glue so it can be easily removed in case it ever needs to be removed again.
The first one I did I used a general type adhesive but after a day or two the fumes from the glue clouded up the inside of the Lens and left a white chalky coating on the inside of the Lens and the face of the display. Had to open it up again and was able to wipe the chalky crap off w/ a damp cloth.
-
iam9i6finest on YouTube wants to know:
My pin on my zmax is loose? what should I do??
Answer:
The center pin insulator is worn or damaged. Replace it before it shorts out and damages the circuit board. Buy a 510 connector insulator for installation in the zmax. Remove the cap and unsolder the wire to the pin. Pull out pin and insulator, lube new insulator first and push in to the connector. Pull wire thru insulator, solder to pin and then push the pin into the insulator. Replace cap
You can purchase (4) insulators for $1.49 from --> Avid Vaper (http://www.avidvaper.com/510-threaded-connector-insulators/)
(http://cdn2.bigcommerce.com/server2100/b3c53/products/270/images/978/IMG_0657__29691.1316761780.1280.1280.jpg)
-
Hello, I am looking for a plastic display window piece for a ZMAX Telescopic. Any ideas where I can find one?
-
Hello, I am looking for a plastic display window piece for a ZMAX Telescopic. Any ideas where I can find one?
I didn't forget about you VaperNerd. I have been looking for the part and didn't find it until today.
Zmax Lens and button (http://www.hoosierecig.com/Zmax-Lens-and-button_p_762.html)
-
Did you find your way over to the Groove controllers okay? :thumbsup:
HINT:
http://www.pactecenclosures.com/product-detail.php?productid=227&seriesid=77&classid=25 (http://www.pactecenclosures.com/product-detail.php?productid=227&seriesid=77&classid=25) :yes"
-
Did you find your way over to the Groove controllers okay? :thumbsup:
HINT:
http://www.pactecenclosures.com/product-detail.php?productid=227&seriesid=77&classid=25 (http://www.pactecenclosures.com/product-detail.php?productid=227&seriesid=77&classid=25) :yes"
I seen that earlier today
-
kinda of off topic for this thread, but does anyone know where to purchase a replacement top cap for a smok zmax? My friend has one she tore up the threads on.
-
kinda of off topic for this thread, but does anyone know where to purchase a replacement top cap for a smok zmax? My friend has one she tore up the threads on.
I can't seem to find a top cap replacement although the bottom cap is available.
You may be able to remove the cap and drill out the 510 connector and replace it with this:
(http://cdn2.bigcommerce.com/server2100/b3c53/products/86/images/261/510ThreadedAdapter1__17272.1293084933.1280.1280.jpg)
-
Thanks Breakthru.
Happy New Year!
-
Thanks Breakthru.
Happy New Year!
You're welcome JohnnyYuma. Wasn't he a Rebel who roamed through the west :laughing:
Happy New Year to you and to all
-
Panther quick and leather tough :rockin smiley:
-
I have a top cap for a z-max. It's missing the center pin bit threads are in great shape. You can have it if you want to cover shipping. Pm me
-
pm sent
-
I will for sure read this my Red Bronze needs son TLC
-
kinda of off topic for this thread, but does anyone know where to purchase a replacement top cap for a smok zmax? My friend has one she tore up the threads on.
Not sure if it'll fit, but it might?
(http://www.stealthvape.co.uk/image/cache/data/vamo%20top%20caps/v5.v6-replacement-vamo-tops-cap-stainless-steel-500x500.JPG)
http://www.stealthvape.co.uk/vamo-top-cap (http://www.stealthvape.co.uk/vamo-top-cap)
This might also work?
(http://cdn1.bigcommerce.com/server3600/53a03/products/701/images/1845/Well_Adapter_Top_WM__98318.1387330639.1280.1280.jpg)
http://www.kidneypuncher.com/510-to-ego-adapter-with-well/ (http://www.kidneypuncher.com/510-to-ego-adapter-with-well/)
http://www.fasttech.com/product/1565103-replacement-stainless-steel-top-cap-for-chi-you (http://www.fasttech.com/product/1565103-replacement-stainless-steel-top-cap-for-chi-you)
You'll have to shop around, cuz there are many 510 ego caps available for a wide variety of devices.
-
Hay thanks for your input I think we have found one. ;cheers;
-
I didn't forget about you VaperNerd. I have been looking for the part and didn't find it until today.
Zmax Lens and button (http://www.hoosierecig.com/Zmax-Lens-and-button_p_762.html)
Hey THANKS Breaktru! Just saw this reply in my email today finally!