Breaktru Forum

eCigarette Forum => Modding => Parts for Mods => Topic started by: Visus on December 10, 2013, 11:51:36 AM

Title: 510 w/nut modders connector
Post by: Visus on December 10, 2013, 11:51:36 AM

(http://img.diytrade.com/cdimg/2073800/32757771/1/1370589717/510_to_510_Adapter_with_nut_Sealed_and_Non-Sealed.jpg)


http://www.fasttech.com/products/1563302

Title: Re: 510 w/nut modders connector
Post by: CraigHB on December 10, 2013, 04:06:59 PM

Sure beats paying $7 a pop for them from e-cig shops.

Title: Re: 510 w/nut modders connector
Post by: Nickgold123 on January 24, 2014, 05:31:09 PM

Does it come with the nut on it? I clicked the link and it took me to a 510 to 510 adapter.

Title: Re: 510 w/nut modders connector
Post by: Breaktru on January 24, 2014, 06:30:49 PM

If you look closely you will see the nut

Title: Re: 510 w/nut modders connector
Post by: Nickgold123 on January 24, 2014, 09:28:35 PM

Oh gotcha. Thanks lol

Title: Re: 510 w/nut modders connector
Post by: katoptrizo on February 18, 2014, 12:29:49 PM

Is this the same as the 5-pack they also offer?  I would assume so, but the photos look slightly different.

Title: Re: 510 w/nut modders connector
Post by: Breaktru on February 18, 2014, 12:38:18 PM

The 5 pack is an e-go adapter. Different.

Title: Re: 510 w/nut modders connector
Post by: katoptrizo on February 18, 2014, 03:56:23 PM

Thanks Break, just found the other thread on the fatdaddyvapes connectors too.  Thinking those look preferable for my first mod?  Looking to start a OKR in a 1590B enclosure.

Title: Re: 510 w/nut modders connector
Post by: kaddigart on February 28, 2014, 02:31:41 AM

That's pretty cheap, but still kind of pricey for a nut. I use either nylon or regular zinc plated nuts or washers that come several to a pack for less than $1 at Home Depot and tap them out. May not be worth the effort if you plan on using just a couple of them, but for those that build, rebuild and build some more for their friends it's a very frugal alternative.