Author Topic: OKR t10 aluminum box mod (my first) (Read 14969 times)

curiousnoob · « **on:** January 19, 2014, 09:29:55 PM »

OKR t10 aluminum box mod :-D its my very first mod inspired by "The Duke" by TheGoss. The box is big!! Hoping to slim things down with more mods to come. I like the heft. Absolutely a stay at home mod. Awaiting the proper battery sleds before I actually use it but voltages are spot on now thanks to the forums great helping hands. There are 2 510 connectors. Reason is, they're epoxied in because I don't trust press fits in aluminum so I have a backup connector. A blank plug will be fitted over the secondary connector for aesthetics. The cover is held on by neodymium magnets and adjustable screw posts that I still need to adjust and lock in place. The pot is replaceable using the PCB mount. Just unthread and replace should it go bad. (Only has a 200 turn lifespan. I'm sure I will be tweaking a lot with different atomisers.) Hopefully it will last awhile and lead me on to some of the amazing mods you guys are posting here! Cheers everyone and thanks for looking

Pantera · « **Reply #1 on:** January 19, 2014, 11:10:13 PM »

nice job for your first mod.
I doubt you will be tuning your pot to often once you find the right spot. Nice idea though

curiousnoob · « **Reply #2 on:** January 19, 2014, 11:14:12 PM »

Yeah, I'm always nervous of something so permanent crapping out *chuckle* thanks for the kudos :-D I've got a long way to go knowledge wise but I am really looking forward to learning about touch switches and voltage cutoff circuitry as well as making mods more efficient voltage wise and size wise. Thanks for looking!

Mandro · « **Reply #3 on:** January 20, 2014, 01:47:50 AM »

That looks great, very neat work.

Visus · « **Reply #4 on:** January 20, 2014, 03:28:03 AM »

Nice mod

You may be surprised with one setting after the newness wears off, I have not changed it a long while.. I use 4.3v from 1.8 - 3.4ohm same setting across the day..
I just ruined an innokin iclear16 atomizer, you are having a much better day with dual 510's. Freakin i16 had machine grease in there it was enough to discolor the grommet, gross..

curiousnoob · « **Reply #5 on:** January 20, 2014, 07:19:00 AM »

Thank you! I kinda figured an extra 510 couldn't hurt with all the real estate I had to work with anyways and they're cheap so why not just wire an extra one. Can't wait to get the battery sleds today so I can actually USE it and not just test it

Breaktru · « **Reply #6 on:** January 20, 2014, 07:54:40 AM »

Yes. Nice going curious.

You are well on your way to a new addictive hobby

kortt · « **Reply #7 on:** January 20, 2014, 12:17:52 PM »

Great job on your first mod! I like the idea of 2 connectors too. Could we have a look at your pot setup? Sounds like an interesting idea.

curiousnoob · « **Reply #8 on:** January 20, 2014, 01:07:36 PM »

I will have to take pics later on of the pot mounting setup, at work at the moment :-D its the 3rd pic down to give you a rough idea. Just spaced the pot with a 3/8 plastic bracket and ran the wires behind the PCB mount. Just loosen the screws and the pot comes out the top, insert a new one if needed and snug them down, back in business!

eve413 · « **Reply #9 on:** January 20, 2014, 01:21:52 PM »

Nice going

it's looking good

CraigHB · « **Reply #10 on:** January 20, 2014, 01:50:02 PM »

Looks good.

You might find the pot holds up better than the ratings provided. Those are guranteed lifespans. Most of the time parts hold up longer than what they say.

curiousnoob · « **Reply #11 on:** January 20, 2014, 02:04:03 PM »

Thank you all especially for the warm welcome

I have no doubt I have a lot to learn and I am sure I will learn a lot here!

kortt · « **Reply #12 on:** January 20, 2014, 02:29:16 PM »

Quote from: curiousnoob on January 20, 2014, 02:04:03 PM

Thank you all especially for the warm welcome I have no doubt I have a lot to learn and I am sure I will learn a lot here!

You've come to the right place for learning to mod and mod related electronics. Best place on the net for modding info and lots of knowledgeable folks here for sure. Plus there is no BS here as you find on other forums.

amdcursed · « **Reply #13 on:** February 23, 2014, 12:01:52 AM »

what switch is that?

Breaktru · « **Reply #14 on:** February 23, 2014, 07:59:15 AM »

Quote from: amdcursed on February 23, 2014, 12:01:52 AM

what switch is that?

See: http://breaktru.com/smf/index.php/topic,215.msg8461.html#msg8461

whoi · « **Reply #15 on:** February 25, 2014, 07:08:13 AM »

Nice work!

smami · « **Reply #16 on:** March 24, 2014, 02:28:28 PM »

What size magnets are you using there?

curiousnoob · « **Reply #17 on:** May 12, 2014, 10:51:15 PM »

Sorry!! I've been away for awhile. They are 1/4" by 1/8" neyodimium magnets from amazon. I just bored the stick holes out and epoxied them in. I used the screws as well. Trimmed the heads, epoxied and set the depth so the cover sat tight and let it sit.

curiousnoob · « **Reply #18 on:** May 12, 2014, 10:55:19 PM »

Quote from: amdcursed on February 23, 2014, 12:01:52 AM

what switch is that?

Sorry I've been away! I got the switch on eBay here:

http://m.ebay.com/itm/301051030988?nav=WATCHING_ACTIVE

The switch is still working great! Sorry for the delay

curiousnoob · « **Reply #19 on:** May 12, 2014, 10:57:11 PM »

Quote from: whoi on February 25, 2014, 07:08:13 AM

Nice work!

Thank you!