0 Members and 3 Guests are viewing this topic.
If 2x in parallel, for the T6 you would need 2x 3A fuses.And yes, you wire the fuse right after the batt +.
I've been wiring 2 fuses in parallel using 2 18650 batts in parallel as shown in A below. With li-poly batts in parallel, I solder the 2 positive tabs together, then attach one end of the paralleled fuses to the soldered tabs.But now I'm wondering - should each batt in a parallel configuration have its own fuse (2x fuse wired in parallel on each batt) as shown in B below? Or does it matter?ETA: this is how I wired the paralleled fuses in Milo with the parallel li-poly batts...
Anyway, a couple days after getting the batteries I laid them in a metal dish of sorts while I was looking for another part. The tabs touched the metal and sparked until I had the chance to grab the batteries and pull them off the surface. Does this mean they're ruined? This is what it looks like. I wasn't sure if I should still be using them or not.
doing a dna 30 build on duel lipo batts what are the best fuses to use availible in uk plus where in uk stocks the silver tact buttons