0 Members and 1 Guest are viewing this topic.
From what I gathered from the Nano Dragon Coil it looks like a 0.6 ohm nano coil laying on top of a wad of saturated cotton.Good luck with your refridge coil setup. I have no clue for that.
Here is how he says he does it: Nano Dragon Coil
Actually I have yet to try the Dragon coil. The info I stated is from the video and not from personal experience.As far as nano vs micro, you would have to try both to determine which is best.Are you using low resistance with a good battery?
Turns white? The cotton is white. At least mine is. Discolors around the coil (dark brown) because of the caramelized juice and the occasional dry hit.You got to keep the cotton wet. That's the part I don't like. Constantly dripping to keep it wet.
I don't know zeus. Perhaps some adjustment of the coil height and cotton placement may help. Are you using a high VG ratio juice? More VG = More Vapor.You got me interested and made one a little while ago.I opened up a fresh Vivi Nova (only thing I had available that wasn't being already used) to try the nano dragon coil.I wrapped 0.8 ohms of 28 gauge Kanthal around a large paper clip, installed it between the neg and post post and fired it up to burn any oils off.I pulled some loosely matted cotton under the coil and wrapped both ends around the neg and pos posts.Do not compress the cotton. Leave it loose.I want to add that I've tried this on several of my mods and the only mod that can make this thing work at full potential is my MCU Boost Mod. This mod is capable of 30 plus watts and high amperage. Even my PTR08100w which is rated at 10A couldn't handle higher voltages. Only worked moderately will low voltage output setting. The DNA20, the DNA12 and the ZMax just cuts out.See attached photos. Click to Enlarge.......
http://i.imgur.com/HAvntC0.jpgHow much resistance do you think this "coil" has?