0 Members and 3 Guests are viewing this topic.
got a question or two now after looking at this real quick.will the version with the Norm Open momentary switch, increase the voltage the longer held, and that voltage will show on the LED?and is the 470 resistor the same one you spec'd in the instructables version? the one I got from Digi Key is marked YAGEO 1315 10w 3 R6 J? lol, you dash man, thanks, will post up pics when i get done. really really appreciate the time you took to help me. thank you. cheers.
wired up, no spark.??
the diode faces away from the board, black ring on it indicates polarity, so polarity should be going out, away from the board towards the lead...... it is a small 2 amp fuse between the switch and battery box..... the rectangular resistor is wired after the diode coming off the out+ on the board.....? the first one I built that I gave to someone had the resistor on the IN + before the fuse between the fuse and the battery lead, not after the diode as I did it. ??
that was it, thank you sir, i got some time in this thing...lol. luckily, i bought extras. i will give it the old switcha-roo tonight, thanks again.
gotta run to the store to pick up some fuses, should I pick up a new resistor as well? 470 ohm resistor?
Try 3A fuses. Some guys use the 3.6 ohm and some use the 470 ohm. Did you try it without any resistor?