Advice on upgrading the Bolt

[Sweet-Vapors]

I know, it isn't a $10,000 mod, but I like the shell and only got it for that and to put a kick in on the cheap. Anyway, I want to pick up a nice new button and will be replacing the hairs in it with actual wires! I had all this in plan before I picked it.

I'd like to find something to look sharp in a black krinkle coated Bolt if anyone has any tips, I would greatly appreciate it

[Breaktru]

I know, it isn't a $10,000 mod, but I like the shell and only got it for that and to put a kick in on the cheap. Anyway, I want to pick up a nice new button and will be replacing the hairs in it with actual wires! I had all this in plan before I picked it.

I'd like to find something to look sharp in a black krinkle coated Bolt if anyone has any tips, I would greatly appreciate it

If that is a MV style horn button, it should be a 3/4" mounting hole. http://www.madvapes.com/Horn-Style-Switch-Black_p_2086.html

This 19mm should fit a 3/4" hole : http://search.digikey.com/us/en/products/PV1S64011/EG4704-ND/2116183
19mm = 0.7480
3/4" = 0.75

This is a nicer 19mm button: http://www.e-switch.com/product/tabid/96/productid/72/sename/pv1-series-long-life-water-resistant-anti-vandal-switches/default.aspx