Author Topic: KRATOS - a DNA12 varipower mod (Read 24303 times)

poorboy · « **on:** September 08, 2012, 03:06:53 PM »

Before i start i would like to thank a few. Zz for his cloudmaker mod, breaktru, craighb and synchro for the inspiration! They are the gods of modding!!! I'm just a disciple of them. Ahahahaha!!!! Roi and bip for letting us pinoys have an easy access to this raw power Dna12... Nough said...

I would like to present.... KRATOS! A Dna12 powered mod that can go from 5w to 12.5w!!! I was able to reached beyond the 12w limit by using evolv recommended awg. It has an alluminum enclosure and plastic endcaps. Still on a stress test with this beast... Tried using 1.5, 1.8, 2.5 and 3ohms atomizers. At some point using a 3ohms atty it only reached 11.5watts but that doesnt bother me cause i rarely use a 3ohms atty. it has a built in charger inside which can be use as a passthru. I have to buy a new wall charger that has atleast 850ma as evolv recommended. So far so good and im loving this new mod!!! Its now my favorite!

Pros:
-set and forget (set to your sweetspot and use any atty resistance
- easy dial to your sweetspot (variable wattage)
-abilty to use as a passthru
-consistent power
-ability to show atty voltage and check remaining battery charge
-alluminum case for durability

Cons:
- battery is fixed inside
- wont be able to use incase there's a blackout unless you have a portable charger to use if you run out of batt charge
- only getting 11.5w using a 3ohms atty

Thats the only cons that i can think of so far from this beast. Im really loving this mod!!! Its one of my favorite. Btw i accidentally dropped it 4feet from the ground and mine has a small scratch and the cover for the display was pushed down and i messed it up with a epoxy but doesn't affects the performance.

Here's a pic

Checking remaining battery charge
More pics to follow.

Thanks for viewing!!!!

Breaktru · « **Reply #1 on:** September 08, 2012, 03:22:42 PM »

Simply beautiful and stylish. Congrats on you build.

poorboy · « **Reply #2 on:** September 08, 2012, 03:39:40 PM »

Thanks BT! Im your humble disciple. Ahahahaha!!!

Pantera · « **Reply #3 on:** September 08, 2012, 07:18:13 PM »

Very nice mod and neatly done

marlow57 · « **Reply #4 on:** September 08, 2012, 07:28:56 PM »

Good work poorboy.

PoppaVic60 · « **Reply #5 on:** September 08, 2012, 09:44:12 PM »

Cute. Where's the BOM? (yes, I am a housing/case-freak ;-)

jomurp · « **Reply #6 on:** September 10, 2012, 11:25:35 AM »

Coool

great DNA build

beamrider · « **Reply #7 on:** September 10, 2012, 09:56:09 PM »

That's looking nice, Hammond makes some nice enclosures, and easy to work with too!

poorboy · « **Reply #8 on:** September 13, 2012, 11:27:34 AM »

thanks everyone for liking!!! i did a stress test and it gave a consistent hit! moderate to heavy vaping last almost a day for me.

poorboy · « **Reply #9 on:** September 25, 2012, 08:15:34 AM »

Another shot.

Breaktru · « **Reply #10 on:** September 25, 2012, 08:30:20 AM »

Nice covering. Different

poorboy · « **Reply #11 on:** September 25, 2012, 10:35:15 AM »

Thanks! It is a vinyl sticker customized from a shop here in the phillipines called epedermis. They have tons of designs for different kinds of pv's aswell including varis.

poorboy · « **Reply #12 on:** November 07, 2012, 10:05:38 AM »

Finally got the guts to upload the video introduction of my Kratos dna12 mod as requested by the vapeheads around the globe.
I apologize for the low quality video. ENJOY!