gfxgfx
 
Please login or register.

Login with username, password and session length
logo
 
gfx gfx
gfx
19817 Posts in 1271 Topics by 5162 Members - Latest Member: sunny2019by July 18, 2019, 09:26:06 PM
*
gfx* Home | Help | Login | Register | gfx
gfx
Breaktru Forum  |  eCigarette Forum  |  Atty/Carto/Tank/Rebuildable  |  Topic: Godzillamizer V3
gfx
gfxgfx
 

Author Topic: Godzillamizer V3  (Read 17178 times)

0 Members and 2 Guests are viewing this topic.

Offline asnider123

  • Super Member
  • *****
  • Joined: Mar 2011
  • Posts: 143
  • Karma: +84/-1
Godzillamizer V3
« on: August 21, 2011, 07:14:31 PM »
Been waiting for weeks to get all the parts together to make another tank, this time based on Breaktru's Dual-Coil Tank design, but using an XL CE2 Clearo.

I started out with 3/4"  thick wall poly tubing, cut a 1.5" length. I then drilled several tiny holes in my Clearo, a half dozen toward the bottom and a couple about 1/2 way up (to avoid a vacuum).


Next I assembled the unit, using the 3/4" tubing, the CE2XL, and two Danco size 1/2 flat spigot washers. They measure 3/4" dia x 1/8" thick. I drilled out the center holes in the washers to tightly fit the CE2


You can fill the tank by sliding a tiny needle (22 ga I think) between the top seal and the poly tubing as shown


Here is the tank with 6ml of USA Mix (two syringes full, all I had of this flavor) .. looks like it would probably accept a couple more ML .. looks great on my GGTB, doesn't it ??


Continued on next post
« Last Edit: August 21, 2011, 07:31:00 PM by asnider123 »

Offline asnider123

  • Super Member
  • *****
  • Joined: Mar 2011
  • Posts: 143
  • Karma: +84/-1
Re: Godzillamizer V3
« Reply #1 on: August 21, 2011, 07:38:34 PM »
Let's try it out .. not bad at all


Now let's try it at 5v .. WOW!!!! Mucho Vapero Muchacho!!!!


Thank you Breaktru and Gummy and all you other tank makers, you have done great things for the vaping world!!

Offline asnider123

  • Super Member
  • *****
  • Joined: Mar 2011
  • Posts: 143
  • Karma: +84/-1
Re: Godzillamizer V3
« Reply #2 on: August 21, 2011, 07:41:43 PM »


No leaks, even upside-down

Online Breaktru

  • Administrator
  • PV Master
  • *****
  • Joined: Nov 2008
  • Location: NY
  • Posts: 3334
  • Karma: +786/-4
  • Gender: Male
  • PLEASE participate in this forum
Re: Godzillamizer V3
« Reply #3 on: August 21, 2011, 08:03:23 PM »
Those Danco washers really worked out well Alan. It's great the way they seal that you can turn it upside down. Nice to lay them down without worrying about leakage.
I have 4 washer versions and they all work great on the Dual Cartos. Glad the clearo tube can withstand the washer pressure.
Looks really nice. These things are great. Beats paying for tanks. I see you went with the 1/2" washers. Nice fit huh?
Do you think the needle may score the seal?

Offline asnider123

  • Super Member
  • *****
  • Joined: Mar 2011
  • Posts: 143
  • Karma: +84/-1
Re: Godzillamizer V3
« Reply #4 on: August 21, 2011, 08:25:03 PM »
Those Danco washers really worked out well Alan. It's great the way they seal that you can turn it upside down. Nice to lay them down without worrying about leakage.
I have 4 washer versions and they all work great on the Dual Cartos. Glad the clearo tube can withstand the washer pressure.
Looks really nice. These things are great. Beats paying for tanks. I see you went with the 1/2" washers. Nice fit huh?
Do you think the needle may score the seal?
Yup, those washers sure work great. I did as you suggested and drilled out the hole for a snug fit, made it tighter in the poly tube. I was afraid of cracking the CE2, otherwise it would be tighter still.

I like CE2's and, until I use up my stock, that will be the basis for my tank mods (unless I figure out how to clean the paper labels off prefilleds :) ) .. they leave sticky stuff on the metal that's hard to clean off. You don't want solvent getting into the packing (yuch), so I am so far trying sticky remover very carefully, I will try lighter fluid, thanks for your suggestion.

Next tank will use 1/2L, I got 2 of each size just to get started. Way too expensive at Ace Hardware.

Needle seems to slide in nicely, hasn't caused a leak. Perhaps if I always hit the same spot, it will eventually break the seal. So far, so good!

You are my inspiration!!

Offline timesarerough

  • PV Master
  • *******
  • Joined: Apr 2011
  • Username: Virus
  • Posts: 392
  • Karma: +337/-0
  • Gender: Male
Re: Godzillamizer V3
« Reply #5 on: August 21, 2011, 10:39:40 PM »
Very nice, Wizard!

And as for the CE2 label question....

Why not just remove the acrylic tube from it all together?

Isn't that how its done with a MAP Tank?

Will the Danco top hole hold a stainless steel threaded shell?

I mean, couldn't you just tap out the Danco far enough to fit a spent SS atty shell with the coil & the center post removed....leaving just enough room in the Danco to stabilize the CE2 ceramic?

Or would that cause a leak?

It would be cool if you could figure out a way to tap it and not have it leak cuz shell-less CE2's are VERY inexpensive!
« Last Edit: August 21, 2011, 10:50:48 PM by timesarerough »

Offline asnider123

  • Super Member
  • *****
  • Joined: Mar 2011
  • Posts: 143
  • Karma: +84/-1
Re: Godzillamizer V3
« Reply #6 on: August 21, 2011, 10:56:17 PM »
Very nice, Wizard!

And as for the CE2 label question....

Why not just remove the acrylic tube from it all together?

Isn't that how its done with a MAP Tank?

Will the Danco top hole hold a stainless steel threaded shell?

My very first attempts with tanks did, indeed, have the acrylic tube removed. I thought that was the way you did it (like a MAP Tank) .. I always had trouble getting those silicone seals on the top right, always had trouble leaking if laying down. And the bottom seal was a bugger bear.


But ever since I saw some of the newer tanks, I discovered that it works just as well (IMHO) to leave the carto tube ON and just perforate it to allow juice to be replenished as needed. Besides, it just feels more stable and solid than my older tanks.

I am happy with the Godzillamizer line, solid, easy to fill, and the V3 can be held completely upsidedown and shaken without leaks. Thanks to Dave for guidance and help.

Offline timesarerough

  • PV Master
  • *******
  • Joined: Apr 2011
  • Username: Virus
  • Posts: 392
  • Karma: +337/-0
  • Gender: Male
Re: Godzillamizer V3
« Reply #7 on: August 21, 2011, 11:45:53 PM »
Do I sense a Breaktru fan club SHOP materializing in the near future?

You guys are WAAAAY ahead of the game!!

Offline timesarerough

  • PV Master
  • *******
  • Joined: Apr 2011
  • Username: Virus
  • Posts: 392
  • Karma: +337/-0
  • Gender: Male
Re: Godzillamizer V3
« Reply #8 on: August 22, 2011, 03:00:07 AM »


No leaks, even upside-down

Soooooo, what happens when you fry that CE2 and your tank is full of juice?

You got a drain plug on that somewhere?

Offline asnider123

  • Super Member
  • *****
  • Joined: Mar 2011
  • Posts: 143
  • Karma: +84/-1
Re: Godzillamizer V3
« Reply #9 on: August 22, 2011, 07:54:03 AM »
Soooooo, what happens when you fry that CE2 and your tank is full of juice?

You got a drain plug on that somewhere?
Uh, no :)

Online Breaktru

  • Administrator
  • PV Master
  • *****
  • Joined: Nov 2008
  • Location: NY
  • Posts: 3334
  • Karma: +786/-4
  • Gender: Male
  • PLEASE participate in this forum
Re: Godzillamizer V3
« Reply #10 on: August 22, 2011, 09:13:05 AM »
Do I sense a Breaktru fan club SHOP materializing in the near future?

You guys are WAAAAY ahead of the game!!

I'm sending out Fan Club Membership Cards w/ discount coupons to all my up coming concert tickets.

Online Breaktru

  • Administrator
  • PV Master
  • *****
  • Joined: Nov 2008
  • Location: NY
  • Posts: 3334
  • Karma: +786/-4
  • Gender: Male
  • PLEASE participate in this forum
Re: Godzillamizer V3
« Reply #11 on: August 22, 2011, 09:14:59 AM »
Soooooo, what happens when you fry that CE2 and your tank is full of juice?

You got a drain plug on that somewhere?

Just pop off either the top or bottom Danco and pour it out. I've done it a couple of times with some nasty experimental juice.

Offline timesarerough

  • PV Master
  • *******
  • Joined: Apr 2011
  • Username: Virus
  • Posts: 392
  • Karma: +337/-0
  • Gender: Male
Re: Godzillamizer V3
« Reply #12 on: August 22, 2011, 09:39:47 AM »
Just pop off either the top or bottom Danco and pour it out. I've done it a couple of times with some nasty experimental juice.

Ahhhh, I thought the Danco's were a permanent part of the tube cuz you talked about Al breaking "the seal" with a syringe.

Ya see, there ya go confusing the Chimp again.... :o

Offline timesarerough

  • PV Master
  • *******
  • Joined: Apr 2011
  • Username: Virus
  • Posts: 392
  • Karma: +337/-0
  • Gender: Male
Re: Godzillamizer V3
« Reply #13 on: August 22, 2011, 03:49:57 PM »
I'm sending out Fan Club Membership Cards w/ discount coupons to all my up coming concert tickets.

Yah, I'll bet....

To all of your worshiping groupies throwing themselves at your feet and telling you "money is no object".

Pah-leeeeease.

Offline timesarerough

  • PV Master
  • *******
  • Joined: Apr 2011
  • Username: Virus
  • Posts: 392
  • Karma: +337/-0
  • Gender: Male
Re: Godzillamizer V3
« Reply #14 on: August 22, 2011, 04:38:14 PM »
I meant that you should open a fan Club store and sell T-shirts and "BreakTru" fan-fare.....

Cuz sooner or later the groupies are gonna WIN and convince you to build and sell your art!

So you may as well just throw in the towel now, Dave and concede.  :D

Online Breaktru

  • Administrator
  • PV Master
  • *****
  • Joined: Nov 2008
  • Location: NY
  • Posts: 3334
  • Karma: +786/-4
  • Gender: Male
  • PLEASE participate in this forum
Re: Godzillamizer V3
« Reply #15 on: August 22, 2011, 04:45:39 PM »
I use to have a Cult Group but they wouldn't drink the Kool-aide so I dis-banned the group, Dam!

Offline timesarerough

  • PV Master
  • *******
  • Joined: Apr 2011
  • Username: Virus
  • Posts: 392
  • Karma: +337/-0
  • Gender: Male
Re: Godzillamizer V3
« Reply #16 on: August 22, 2011, 04:57:13 PM »
I use to have a Cult Group but they wouldn't drink the Kool-aide so I dis-banned the group, Dam!

Well that explains a lot....ya .44 caliber killer!  :P

Online Breaktru

  • Administrator
  • PV Master
  • *****
  • Joined: Nov 2008
  • Location: NY
  • Posts: 3334
  • Karma: +786/-4
  • Gender: Male
  • PLEASE participate in this forum
Re: Godzillamizer V3
« Reply #17 on: August 22, 2011, 05:16:18 PM »
This was from my cult days:

Offline asnider123

  • Super Member
  • *****
  • Joined: Mar 2011
  • Posts: 143
  • Karma: +84/-1
Re: Godzillamizer V3
« Reply #18 on: August 22, 2011, 05:19:38 PM »
This was from my cult days:
Where'd you find that picture? I was in college back then. LOL

Online shanen35

  • Jr. Member
  • **
  • Joined: Apr 2010
  • Location: USA
  • Posts: 17
  • Karma: +7/-0
  • Gender: Female
Re: Godzillamizer V3
« Reply #19 on: August 22, 2011, 06:39:47 PM »
You guys are funnier than a barrel of Monkeys, no offense Times.  ;)

Where do I sign up for the Fan Club. I want to join all 3 of you guys clubs.
Do I get free T-Shirts.  ;D

Online shanen35

  • Jr. Member
  • **
  • Joined: Apr 2010
  • Location: USA
  • Posts: 17
  • Karma: +7/-0
  • Gender: Female
Re: Godzillamizer V3
« Reply #20 on: August 22, 2011, 06:43:05 PM »
BTW Alan, I love what you did with the CE2

Offline timesarerough

  • PV Master
  • *******
  • Joined: Apr 2011
  • Username: Virus
  • Posts: 392
  • Karma: +337/-0
  • Gender: Male
Re: Godzillamizer V3
« Reply #21 on: August 22, 2011, 07:41:25 PM »
You guys are funnier than a barrel of Monkeys, no offense Times.  ;)

Where do I sign up for the Fan Club. I want to join all 3 of you guys clubs.
Do I get free T-Shirts.  ;D

That's it, laugh at my pain Shanen....anything that I can do to make your life that much brighter!  ;D

Surf around the modding area, cuz you'll be in tears by the time you're finished!

Just like the Chimp.... :'(

Offline columbusbk

  • Jr. Member
  • **
  • Joined: Mar 2011
  • Posts: 24
  • Karma: +5/-0
Re: Godzillamizer V3
« Reply #22 on: August 26, 2011, 05:26:30 PM »
You got me thinking Alan, I got a bunch of Clearomizers I'd like to turn into  tanks
Thank you for the idea Mr. Wizard.

Breaktru Forum  |  eCigarette Forum  |  Atty/Carto/Tank/Rebuildable  |  Topic: Godzillamizer V3
 

gfxgfx
gfx gfx
Powered by MySQL Powered by PHP Valid XHTML 1.0! Valid CSS!